230L blow molding machine

 

SNB120-230L technical parameters
Basic Specifications	unit	Fixed opening and closing
using raw materials	PE.PP.ABS..
Maximum product volume	L	230
empty loop	PC/HR	180
Machine Dimensions (L×W×H)	M	9.5×4.1×6.5
Mechanical weight	T	36
Mould opening and closing system
Clamping force	KN	800
Template size	MM	1200×1300
Mould opening and closing stroke	MM	800-1700
Die transfer stroke	MM	900
Maximum die size (W×H)	MM	950×1600
Die thickness	MM	900-960
power
Servo oil pump motor power	KW	37
Servo oil pump displacement	L/MIN	200
blowing pressure	MPA	1
Gas consumption	M3/MIN	3
cooling water pressure	Mpa	0.5
water consumption	L/min	120
Average energy consumption	KW	120-140
Extrusion system
Screw diameter	MM	120
Screw aspect ratio	L/D	32
Plasticizing capacity (HDPE)	KG/H	320
Number of screw heating sections	ZONE	6
Screw heating power	KW	39
Screw fan power	KW	0.6
Extrusion motor power	KW	110(132)
die
Die head heating zone segment number	ZONE	6
Single die head heating power	KW	38
Maximum die diameter	MM	500
storage tank volume	L	20
accumulator weight	KG	15

 
Basic configuration:
Electronic control system: PLC control system made by MITSUBISHI in Japan, 10 inches colourful touch screen control system made in Taiwan, all-round realization of process parameter setting, retrieval, monitoring, fault diagnosis; Mitsubishi 4AD temperature control module, integrated and precise control of temperature changes, reliable performance, long lasting;
Hydraulic system: Taiwan or Germany Servo oil pump motor + Japanese Sumitomo pump, equipped with Taiwan hydraulic components, proportional pressure control, the whole machine operates smoothly, responds quickly and efficiently, and reduces equipment energy consumption and noise significantly;
Mould opening and closing system: Double horizontal movement + ball linear guide + beam wall cylindrical shaft + center clamping, with high-precision rack and pinion, to ensure efficient and stable mold opening and closing; large oil cylinder pressurized clamping to ensure greater clamping force
Extrusion system: Hard tooth surface reducer + ABB inverter + Siemens motor + special optimized screw for blow molding, to ensure the perfect plasticization of various raw materials, ensure the screw extrusion volume per unit time, efficient and stable speed regulation, low noise, high efficiency energy saving;
Die head system: made of special steel, optimized flow design, center feed extrusion die head, eliminate the merge line, improve product performance;
Wall thickness system: Japanese MOOG 100 points wall thickness controller + Use the most advanced product surface thickness controller in China to control accuracy is 0.05-20MM, which perfectly realizes the precise control of various products;