160L blow moldng machine

SNB110-160L technical parameters
Basic Specifications	unit	Fixed opening and closing
using raw materials	PE.PP.ABS..
Maximum product volume	L	160
empty loop	PC/HR	300
Machine Dimensions (L×W×H)	M	7×3.9×5.4
Mechanical weight	T	twenty three
Mould opening and closing system
Clamping force	KN	750
Template size	MM	1100×1400
Mould opening and closing stroke	MM	600-1400
Die transfer stroke	MM	600
Maximum die size (W×H)	MM	1000×1400
Die thickness	MM	610-750
power
Servo oil pump motor power	KW	twenty two
Servo oil pump displacement	L/MIN	150
blowing pressure	MPA	1
Gas consumption	M3/MIN	1.8
cooling water pressure	Mpa	0.5
water consumption	L/min	120
Average energy consumption	KW	70-80
Extrusion system
Screw diameter	MM	110
Screw aspect ratio	L/D	25
Plasticizing capacity (HDPE)	KG/H	180-220
Number of screw heating sections	ZONE	4
Screw heating power	KW	twenty four
Screw fan power	KW	0.6
Extrusion motor power	KW	75
die
Die head heating zone segment number	ZONE	5
Single die head heating power	KW	38.5
Maximum die diameter	MM	550
storage tank volume	L	15 (20)
accumulator weight	KG	11 (15)

 
Basic configuration:
Electronic control system: PLC control system made by MITSUBISHI in Japan, 10 inches colourful touch screen control system made in Taiwan, all-round realization of process parameter setting, retrieval, monitoring, fault diagnosis; Mitsubishi 4AD temperature control module, integrated and precise control of temperature changes, reliable performance, long lasting;
Hydraulic system: Taiwan or Germany Servo oil pump motor + Japanese Sumitomo pump, equipped with Taiwan hydraulic components, proportional pressure control, the whole machine operates smoothly, responds quickly and efficiently, and reduces equipment energy consumption and noise significantly;
Mould opening and closing system: Double horizontal movement + ball linear guide + beam wall cylindrical shaft + center clamping, with high-precision rack and pinion, to ensure efficient and stable mold opening and closing; large oil cylinder pressurized clamping to ensure greater clamping force
Extrusion system: Hard tooth surface reducer + ABB inverter + Siemens motor + special optimized screw for blow molding, to ensure the perfect plasticization of various raw materials, ensure the screw extrusion volume per unit time, efficient and stable speed regulation, low noise, high efficiency energy saving;
Die head system: made of special steel, optimized flow design, center feed extrusion die head, eliminate the merge line, improve product performance;
Wall thickness system: Japanese MOOG 100 points wall thickness controller + Use the most advanced product surface thickness controller in China to control accuracy is 0.05-20MM, which perfectly realizes the precise control of various products;