12L blow molding machine

SN90-12L technical parameters
Basic Specifications	unit	Single/double station
using raw materials	PE.PP.PVC.PA...
Maximum product volume	L	12
Number of touch heads	SET	1, 2, 3, 4, 6
empty loop	PC/HR	750
Machine Dimensions (L×W×H)	M	3.6×2.2×2.7
Mechanical weight	T	4.5
Mould opening and closing system
Clamping force	KN	125
Template size	MM	550×460
Mould opening and closing stroke	MM	200-600
Die transfer stroke	MM	600
Maximum die size (W×H)	MM	550×430
Die thickness	MM	210-300
power
Oil pump drive power	KW	15
Maximum drive total power	KW	33
blowing pressure	MPA	0.6
Gas consumption	M3/MIN	0.6
cooling water pressure	Mpa	0.2-0.3
water consumption	L/min	50
Average energy consumption	KW	20-23
Extrusion system
Screw diameter	MM	80/90
Screw aspect ratio	L/D	24
Plasticizing capacity (HDPE)	KG/H	80
Number of screw heating sections	ZONE	3
Screw heating power	KW	12.6
Screw fan power	KW	0.25
Screw motor power	KW	22
die
Number of heating stages for a single die	ZONE	3
Single die head heating power	KW	5.7
Maximum die diameter	MM	180
Center distance of double die head	MM	250
Three-die head center distance	MM	130
Four-die head center distance	MM	110

Basic configuration:
Electronic control system: PLC control system made by MITSUBISHI in Japan, 10 inches colourful touch screen control system made in Taiwan, all-round realization of process parameter setting, retrieval, monitoring, fault diagnosis; Mitsubishi 4AD temperature control module, integrated and precise control of temperature changes, reliable performance, long lasting;
Hydraulic system: Taiwan or Germany Servo oil pump motor + Japanese Sumitomo pump, equipped with Taiwan hydraulic components, proportional pressure control, the whole machine operates smoothly, responds quickly and efficiently, and reduces equipment energy consumption and noise significantly;
Mould opening and closing system: Double horizontal movement + ball linear guide + beam wall cylindrical shaft + center clamping, with high-precision rack and pinion, to ensure efficient and stable mold opening and closing; large oil cylinder pressurized clamping to ensure greater clamping force
Extrusion system: Hard tooth surface reducer + ABB inverter + Siemens motor + special optimized screw for blow molding, to ensure the perfect plasticization of various raw materials, ensure the screw extrusion volume per unit time, efficient and stable speed regulation, low noise, high efficiency energy saving;
Die head system: made of special steel, optimized flow design, center feed extrusion die head, eliminate the merge line, improve product performance;
Wall thickness system: Japanese MOOG 100 points wall thickness controller + Use the most advanced product surface thickness controller in China to control accuracy is 0.05-20MM, which perfectly realizes the precise control of various products;